Innovative Gloves & Safety helps teams find the right glove for the job, with ANSI A1–A9 coverage, certification support, and responsive help when needs are hard to match.
Prevent Injuries.
Prove Compliance.
Protect Your Team.
ANSI/EN388-rated industrial gloves for metal fabrication, automotive, and manufacturing, with support for spec matching, certification needs, and evaluation for qualifying styles.
Support for EHS teams, plant buyers, and distributors. Explore distributor support →
- Help matching the glove to the actual hazard
- Certification and compliance support when it matters
- Initial response within 1 business day
- Help matching the glove to the actual hazard
- Certification and compliance support when it matters
- Initial response within 1 business day
Hand protection for real production environments.
Innovative Gloves & Safety supplies industrial hand protection for manufacturing, metal fabrication, automotive, oil & gas, warehousing, and controlled environments. Products include cut-resistant gloves, impact gloves, general-purpose gloves, clean-room liners, sleeves, and leather-reinforced hand protection, with ANSI/ISEA 105, EN388:2016, ANSI puncture, ANSI/ISEA 138 impact, and EN407 documentation available where applicable.
Tell Us the Hazard or Current Glove
Share your current glove, application, ANSI requirement, or protection concern. A SKU, cert requirement, or simple job description is enough to get started.
Initial Response Within 1 Business Day
We help narrow the right protection, coating, fit, and documentation needs. Quote or sample path follows once we understand the spec and volume.
Evaluate the Options
Review options, documentation, and sample availability for qualifying styles before moving forward.
Spec It in Three Steps
Narrow the field by hazard, environment, and required protection level. Still not sure? Tell us your application and we'll spec it with you.
Primary Hazard
Work Environment
Required ANSI Level
Know Your
Standards.
ANSI, EN388, and OSHA 1910.138 all shape glove selection, documentation, and audit readiness. Plain-English breakdowns below.
How to Choose Faster
Start with the actual hazard, then pressure-test dexterity, grip conditions, and documentation requirements. The right glove is the one workers keep on at the point of hazard.
Talk through your application →Common Selection Mistakes
- Choosing maximum cut level when dexterity is the real failure point
- Using the wrong coating for oily, wet, or rough materials
- Waiting until after ordering to chase cert documentation
What to Send Us
- Current SKU or supplier reference
- Hazard, environment, and surface conditions
- Required ratings, sizes, and annual volume
ANSI/ISEA 105
Cut Levels A1–A9
ANSI cut levels measure cut resistance in grams using the TDM-100 test. A1 = 200g of cut resistance; A9 = 6000g. Higher ratings are not always better if they reduce dexterity. The right level depends on the actual hazard, not just the highest score.
Find the right ANSI level for your applicationEN388:2016
Mechanical Risk
EN388 is the European standard for mechanical protection and often matters in global or export-driven programs. It covers abrasion, cut, tear, puncture, and impact, shown as a 4- or 5-character score such as 4543B. EN388 documentation is available on applicable product lines.
Request EN388 cert docs for any productOSHA 1910.138
Hand Protection
OSHA 1910.138 requires glove selection to follow the actual hazard, not guesswork. Hand protection should be tied to a documented hazard assessment, and the glove should match the real exposure. Supporting documentation matters when programs are reviewed.
Get a compliance-ready cert packageANSI vs EN388:
Key Differences
ANSI and EN388 use different test methods, so the ratings do not translate directly. ANSI A4 is not the same as EN388 level 4. ANSI usually matters most in US programs, while EN388 often matters in global or mixed-standard environments.
Ask about dual-certified products20+ Product Lines Across Cut-Resistant,
Impact, and General Purpose Styles.
Product lines built for real industrial hazards, with help on spec matching, documentation, and evaluation.
Cut-Resistant Gloves
Cut-resistant gloves for sharp edges, stamped parts, sheet metal, and heavy handling where cut risk is part of the job.
- Best for metal fabrication, automotive, and general manufacturing
- Choose by ANSI level, coating, and gauge
Impact Gloves
Impact styles for tougher mechanical environments where cut, puncture, and back-of-hand protection matter together.
- Best for oil & gas, heavy mechanical work, and multi-hazard tasks
- Look for impact, puncture, and grip together
General Purpose Gloves
General purpose gloves for everyday handling, grip, comfort, and lighter protection needs across the floor.
- Best for assembly, warehousing, handling, and liner applications
- Choose by comfort, coating, and wear pattern
10G Cut-Resistant Sleeve
PU Coated
Covers hand and forearm in one integrated piece, closing the exposure gap where glove and sleeve separate, a common failure point in stamping and fabrication.
ANSI A4 + EN388 documentation included for EHS program records.
13G Impact Glove
Nitrile Scrub + TPR
TPR impact protection and a reinforced thumb combine coverage and durability, helping this glove hold up in fabrication work with knocks, sharp edges, and heavy wear.
ANSI A5, Puncture Level 5, ISEA 138 Impact Level 2 cert docs included.
13G Clean Room Glove
Uncoated — Sizes 6–10
Breathable white liner stays comfortable through extended light-duty wear, a natural fit for clean or controlled environments.
Clean room ready. Liner-compatible. Documentation on request.
7G Clean Room Glove
Extended Cuff — Sizes 7–9
Extended cuff adds wrist coverage without making the glove feel restrictive, useful where protection needs to run past the glove line.
Clean room ready. Extended cuff variant. Documentation on request.
7G Leather + TPR Impact
Cut-Resistant Shell
Combined cut, puncture, and impact protection covers multiple hazards in one glove, built for higher-risk work where one exposure rarely comes alone.
ANSI A5, ISEA 138 Impact Level 3 documentation included.
7G General Purpose
Poly-Cotton Uncoated
Breathable poly-cotton knit keeps hands cooler through repetitive handling, a practical fit for warehouse, packaging, and general shop work.
Basic protection documentation on request.
7G General Purpose
PVC Dot Grip
Double-sided PVC dots add grip from either side of the glove, helping with boxes, bins, and loose parts that shift in the hand.
Standard protection documentation on request.
13G General Purpose
PU Palm — Black
Black PU palm maintains dexterity while hiding dirt and staining, a cleaner-looking option for busy production and shop floors.
EN388 documentation included. Suitable for programs requiring European standard compliance.
13G General Purpose
PU Palm — Grey
Lightweight PU palm keeps the glove nimble and easy to control, well suited to assembly, inspection, and other detail-oriented work.
ANSI A1 + EN388 documentation included.
13G Liner / General Purpose
Navy Blue — One Size
Uncoated knit adds light warmth without fighting hand movement, an easy choice for liner use, cold starts, or light-duty wear.
Documentation on request.
13G Liner / General Purpose
White — One Size
White knit liner stays comfortable through extended wear, and makes dirt or debris easier to spot in inspection and packaging areas.
Documentation on request.
10G Cut-Resistant
PU Palm — White
ANSI A4 cut protection with a flexible PU palm balances protection and control, a strong fit for stamped parts and sharp metal edges.
ANSI A4 + EN388 documentation included. Ready for EHS program submission.
10G Cut-Resistant
PU Palm — Black & White
Salt-and-pepper shell hides dirt and staining while maintaining ANSI A3 cut protection, extending visible service life and reducing early swap pressure.
ANSI A3 + ISEA 138 Impact Level 3 documentation included.
10G Cut-Resistant
Hi-Vis Orange PU — A8
Hi-vis orange shell improves glove visibility while delivering ANSI A8 cut protection, useful on fabrication floors where sharp edges and line-of-sight both matter.
ANSI A8, Puncture Level 4 certification documentation included.
10G Cut-Resistant
Hi-Vis Orange Latex — A9
ANSI A9 cut protection with a latex palm stands up to more aggressive edges, built for severe cut environments and heavier material contact.
ANSI A9 — highest ANSI cut level. Full cert documentation + EN388 included.
10G Cut-Resistant
Hi-Vis Orange Nitrile Scrub — A8
Nitrile scrub coating keeps grip on oily or slick parts where smoother palms start to slide, helping workers stay protected without losing control.
ANSI A8, Puncture Level 4. All cert docs ready for EHS program records.
10G Cut-Resistant
Nitrile Scrub + Reinforced Thumb
Reinforced thumb crotch targets the highest-wear point on industrial gloves, reducing early failure, mid-shift swaps, and avoidable downtime.
ANSI A6 + EN388 + EN407 (heat resistance) — covers multi-standard EHS programs.
10G Cut-Resistant
Latex + Full-Coated Thumb — A6
Full-coated thumb adds coverage where abrasive handling wears gloves out first, helping extend life in the main failure zone.
ANSI A6 + EN388 documentation included for EHS program compliance.
15G High-Dexterity
Nitrile Scrub — Grey
Ultra-fine 15G gauge gives a more precise feel for detailed work where bulkier gloves are often removed.
EN388 documentation included. Suitable for electronics and precision manufacturing EHS programs.
13G Cut-Resistant
Uncoated — Green
Uncoated ANSI A6 works for tasks where coatings get in the way, and also serves as a high-protection liner under leather or coated gloves.
ANSI A6, Puncture Level 4 + EN388 documentation included.
10G Cut-Resistant
Leather Palm + Fingers
Leather palm and fingers add grip and abrasion resistance where coated palms wear down faster, a dependable option for glass, metal, and rough parts.
ANSI A5, Puncture Level 4 certification documentation included.
7G Cut-Resistant Leather
Wrapped Fingers + Knuckles
Added leather across the fingers and knuckles protects high-contact zones, a better fit for heavier fabrication and tougher daily wear.
ANSI A6, Puncture Level 4 + EN388 4X43F — all documentation included.
7G Cut-Resistant
Goatskin Leather
Soft goatskin exterior improves comfort without giving up cut protection underneath, making high-protection wear easier to keep on through long shifts.
ANSI A6, Puncture Level 4. Documentation included. Full size run 7–12.
7G Cut-Resistant Leather
Palm + Fingers
Leather palm creates a tougher gripping surface than coated palms alone, useful for rough materials that wear through standard gloves too quickly.
ANSI A6 + EN388 4X43F documentation included.
7G Cut-Resistant Leather
Wrapped Fingers + EN407
Wrapped leather fingers reinforce the areas that take the hardest abuse, helping the glove last longer around sharp or jagged materials.
ANSI A6 + EN388 + EN407 heat resistance — multi-standard compliance ready.
7G Cut-Resistant Leather
Full Coverage + Safety Cuff
Reinforced leather coverage protects the hand’s main wear zones, a stronger choice for jobs with constant abrasion and heavy contact.
ANSI A6, Puncture Level 4 + EN388 — most comprehensive cert doc in the leather line.
7G Cut-Resistant
Steel Wire + PVC Dots
Steel-wire cut liner adds protection against sharp materials while PVC dots help stop slips, effective in wet or dry handling conditions.
EN388 certification documentation included.
13G Cut-Resistant
Hi-Vis Green PU — A2
Reinforced thumb crotch on an A2 glove protects the highest-wear failure zone — extends service life and reduces replacement frequency in assembly and light fabrication.
ANSI A2 + EN388 documentation included.
13G Cut-Resistant
Hi-Vis Green Microfoam Nitrile — A2
Microfoam nitrile improves wet and oily grip versus standard PU, helping reduce glove removal on oily lines.
ANSI A2 + EN388 included. Paired PU version (P-G-10233) available if dry grip preferred.
Built for Industrial
Environments
Built for industrial environments where glove choice affects safety, uptime, and worker adoption.
Metal Fabrication
Metal fabrication environments with sharp edges, stamped parts, and abrasion-heavy handling.
Hand injuries are the #1 recordable incident in metal fab. OSHA 1910.138 requires documented hazard assessment for PPE selection. IGS provides compliant cert docs for every SKU.
Automotive Assembly
Automotive assembly lines where grip, dexterity, cut protection, and worker acceptance all matter across long shifts.
Automotive Tier 1 and Tier 2 suppliers often require EN388 certification alongside ANSI. IGS provides dual-certified documentation for suppliers with global parent company requirements.
General Manufacturing
General manufacturing floors with varied tasks, mixed hazards, and a need for dependable everyday hand protection.
General manufacturing has high PPE consumption but often low compliance documentation. IGS provides full ANSI/ISEA cert records suitable for OSHA audit even on high-volume, commodity SKUs.
Oil & Gas
Oil & gas and heavier mechanical work where impact, puncture, durability, and cut resistance all matter.
Oil & gas EHS programs typically require ANSI/ISEA 138 impact ratings alongside cut resistance. IGS provides combined ANSI + EN388 + impact cert packages for field and plant applications.
Whatever
You Need.
Solved.
We carry 20+ product lines ready to quote. But what sets us apart is what happens when the catalog doesn't fit exactly — we spec-match, source, or manufacture. Direct supply chain access means we solve problems that catalog-only distributors can't.
Full Size Run, Every Time
Sizes 6–12 with color-coded hems on most lines. No workers doubling up or going unprotected because their size is out of stock.
Documentation Ready for Your Audit
ANSI, EN388, ISEA 138, EN407 — full cert documentation per SKU, on request, before you place an order. No chasing paperwork after the fact.
Spec Matching — or We Build It
Have an existing SKU to match? A custom application? We find the right product, source it if we don't carry it, or manufacture to your exact spec.
Consistent Supply, Not a One-Time Pull
Direct supply chain access supports ongoing reorder requirements — not just your first order. Your program runs reliably, not just your pilot.
Build Your
PPE Line
with IGS.
Support for distributors that need to fill spec gaps, respond faster to customers, and expand glove coverage without rebuilding sourcing from scratch.
Broad Catalog Depth
Fill product and spec gaps without rebuilding your sourcing base.
Private Label Manufacturing
Build private label programs around your brand, packaging, and target specs.
Hard-to-Match Styles
Find harder-to-match styles when standard lines fall short or customer requirements get more specific.
Responsive Support
Get faster support on quotes, specs, and documentation when customers need answers quickly.
Tools for Glove Selection,
Documentation, and Review.
Tools for glove selection, documentation, and internal review.
Starting from Scratch?
Use the ANSI guide first, then send your application details and we will narrow the field with you.
Get selection help →Matching a Current Glove?
Send your supplier SKU, current rating, coating, and wear complaint. That is usually enough to start a fast match process.
Send your current spec →Preparing for Audit or Review?
Pull the standards guidance and tell us which documentation your team needs before you place an order.
Review compliance support →Built in Houston.
Built for Industry.
Innovative Gloves & Safety supports industrial buyers with hand protection for general use, higher-cut applications, and specialty needs. We help with product selection, evaluation, and documentation.
We help buyers find the right glove and support compliance needs without slowing programs down.
"We help buyers find the right glove and support compliance needs without slowing programs down."
Certifications & Documentation
- ANSI/ISEA 105 cut, abrasion, and puncture resistance — per SKU on request
- EN388:2016 mechanical risk certification on applicable product lines
- ANSI/ISEA 138 impact protection ratings on impact-certified gloves
- EN407 heat resistance on select leather product lines
- SDS and compliance records available for EHS program documentation
- All documentation provided before order placement — no post-purchase chasing
Your Brand.
Our Supply
Chain.
Distributors and large-volume buyers who need branded PPE: IGS provides end-to-end white label manufacturing. Your spec, your logo, your packaging — backed by our sourcing infrastructure and cert documentation capability.
Discuss White LabelConsultation
Share your spec, target application, and brand requirements. We identify the right base product or design from scratch.
Design & Development
Custom colors, logo, label, packaging, and compliance markings aligned to your brand identity and program requirements.
Manufacturing
Production through trusted OEM partners with strict quality control. No compromise on protection, certification, or durability.
Ongoing Supply
Reliable fulfillment with full documentation — not just a first order, but a sustainable supply relationship under your brand.
Answers Before
You Have to Ask
Common questions buyers ask about spec matching, certifications, samples, and private label support before moving forward.
Can you provide certification documents for audits or internal review?
What does EN388 mean on a glove spec sheet?
What is the difference between ANSI and EN388?
Can you match our current glove from another supplier?
How do I know which glove spec is right for my application?
Can you help if we only know the hazard, not the exact glove spec?
What ANSI cut level do I need for metal fabrication?
Do you offer samples before we place an order?
What is the minimum order quantity?
Do you offer private label or custom programs?
Let’s Help You Spec the Right Glove
Tell us the hazard, application, current glove, or certification need. We'll help narrow the right options and follow up with relevant next steps.
Share the hazard, the current glove, or the documentation need, and we'll help from there.
A current SKU, the application, the hazard, required cut level, or a certification question is enough to get started.
Privacy Policy
Last updated: May 2026. Innovative Gloves & Safety collects the information you submit through this website, including your name, company, work email, inquiry details, estimated glove volume, estimated glove spend, and any message you choose to provide.
We use this information to respond to requests, recommend products, provide quotes or sample options, support customer service, and improve our website and marketing. We may also collect website analytics and behavior information, such as pages visited, device/browser information, referral source, campaign interactions, heatmaps, and session recordings to understand how visitors use the site.
We do not sell personal information. We may share information with service providers that help operate our website, analytics, lead tracking, email, CRM, hosting, or customer communications, but only as needed to support our business operations.
You can request that we update or delete your information by contacting info@innovativegloves.com. By submitting a form on this site, you consent to our use of the information for the purposes described above.
This policy is a general business privacy notice and may need legal review before use in regulated or jurisdiction-specific situations.